Peugeot 3008 Key Fob Problems
The mid-sized SUV from Peugeot, the 3008, has plenty of positive qualities. It's stylish, handles well and has a big boot. But can it fend off strong competition in the most crowded area of the market?
If your Peugeot keyfob fails to function, it may have been exposed to clean or soapy tap water. You may need to take off the battery, clean it using isopropylethanol or electronic cleaner.
Dead coin battery
Peugeot key fobs have an insignificant coin battery that powers their remote locking and other functions. This battery has a finite life span and may wear out over the course of years of usage. A simple way to check whether the battery is defective is to perform an examination of voltage. Multimeters are used to determine the voltage between the poles that are plus and minus of the battery. This test will reveal whether the battery is dead.
The receiver module could be the reason why your key fobs not functioning after using your Peugeot 3008 a long time. The receiver module is in charge of receiving radio frequency signals generated by key fobs and sending them to the car's systems. If the receiver module is in an issue, it will not be able to send commands to the other modules in the car.
Moisture or sweat that gets on the circuit board is another frequent reason for an inoperable key fob. This can result in short circuits that drain the battery, and cause the key fob to not be able to lock remotely. feature of the key fob. If this happens then you must take your key fob to an expert in chip level repair to repair it.
Water damage
If you dropped your key fob in the pool, tossed it in the washing machine or just put it in the rain for too long, water damage can be a serious issue. Water makes for a good conductor, and it can also short out parts of the circuit board. It could also cause corrosion of the traces of metal and other components of the key fob. A circuit board that is wet could also cause the battery to lose its charge.
If you have an extra key fob try using it to unlock or lock your Peugeot 3008 to rule out the possibility that a dead battery is at the root of the problem. Interference signals can also cause your key fob to cease working properly. These interfere with the signals sent by the receiver module. These signals could come from a variety of sources such as radio transmitters in close proximity.
If you hear sloshing noises emanating from inside your Peugeot 3008 while driving, it's due to a clogged condensate drain of the evaporator. You can identify this by finding the drain holes under your door and blowing compressed air in them. You can also use a flexible wire to move the drain holes around and dislodge any dirt that might have built up there. Air pockets can also be indicated by sloshing noises.
The receiver module is not working properly.
The receiver module of a Peugeot 3008 is responsible for transmitting an electronic remote keyless signal from the key fob to the receiver in the car. The receiver module may be damaged and block the car from accepting your key fob. This problem can also be caused by an unresponsive battery or water damage. Also, interference from electronic devices operating at the same frequency. In these instances the car could display an error message saying "card not detected" on the display.
There are many options to solve this issue. Try replacing the battery or reprogram the key fob. You could also use a spare key in order to start the car. However, if the key fob isn't working after all these steps, it may have a chip that is malfunctioning.
The best method to determine whether the key fob is equipped with a malfunctioning chip is to take it off and clean it with a paper towel and rubbing alcohol. If the chip is damaged it is recommended to buy a new one. peugeot 207 car key come with a coin cell battery holder, which fits the most commonly used types of key fob batteries. They can also be personalized with digital printing and CNC machined cutouts. If your key fob has been exposed to salty or dirty tap water, the chip may be contaminated and need to be cleaned.
Faulty keyless entry system
If you see "card not detected", this signifies that your car isn't receiving an alert from your key fob. This could be due to many reasons, including the battery being weak or dead. The issue can be resolved by pressing the start button on the key fob. In some instances, you'll have to take the keyfob to an Peugeot dealer for further repairs.
The first step to troubleshooting a Peugeot 3008 key fob that won't unlock or lock the doors is to test its battery. Batteries are the primary cause of a malfunctioning fob but there are other factors that could contribute to this issue as well. They include worn buttons, water damage, receiver module issues and signal interference.
If you've recently been exposed to water and have your Peugeot key fob exposed to water that is clean it's a good idea remove the battery and dry the electronic components with paper towel. You can also try isopropyl alcohol or cleaning solution to do this. It is recommended to replace the fob if it has been exposed to salt water or soapy water.
If your key fob doesn't work It can be reset by removing the battery with 12 volts for 15 minutes. Connect the negative cable, and then the positive cable.